Chamber metering valves are one of the most accurate ways of dispensing lubricants. They work according to the volumetric dosing principle. Material is discharged shot by shot via a metering piston. This ensures a dispensing process that is insensitive to pressure fluctuations. The dosing volume (0.05 to 100 milliliters) can be easily and quickly adjusted via a setscrew. The same valve can thus be used for different quantities.
Dispensed volumes are accurate to within ±1 percent of the set amount. The valve’s seal provides up to 8 million dispensing cycles. With stroke detection, the dispensing process can be monitored simply and reliably. When filling and discharging the dosing chamber, the dosing piston is controlled by material pressure. A stroke sensor monitors this movement and thus indirectly detects material flow. Stroke detection is performed magnetically via commercially available C-slot sensors. Dk-Lok Fitting
See this company at The ASSEMBLY Show South.
Dopag & Meter Mix US www.dopag.com
You must have JavaScript enabled to enjoy a limited number of articles over the next 30 days.
On Demand Connecting shop floor tools to a manufacturing execution system is critical to error-proofing assembly processes, improving quality control, and lowering defect and scrap rates. Join Torrence Williams, Partnerships Manager for Pico MES, and Dan Smith, VP of Sales for Kolver Tools, as they discuss an easier path for manufacturers to start connecting their factory floor.
On Demand This topic is something that challenges each of us every day that we go to work. This talk is about change and why it works and why it fails. It is focused on manufacturing facilities, because that is where the author has spent most of his working life.
Copyright ©2024. All Rights Reserved BNP Media.
Bulkhead Design, CMS, Hosting & Web Development :: ePublishing